Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS/PA NM-11 INEOS STYRO KOREA
Terblend®N
Helmet,sporting goods,Shell,Automotive sector,Application in the automotive field
Processability,High impact resistance,High mobility
FDA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| Ball Pressure Test | ISO 2039-1 | 86.0 Mpa |
| film | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| elongation | Break | ISO 527-3 | >50 % |
| thermal performance | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Annealed | ISO 75-2/A | 65.0 °C |
| 0.45MPa,Annealed | ISO 75-2/B | 85.0 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1E-04 cm/cm/°C |
| Vicat softening temperature | -- | ISO 306/B50 | 102 °C |
| -- | ISO 306/A50 | 160 °C |
| mechanical properties | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| Bending modulus | ISO 178 | 1800 Mpa | |
| bending strength | ISO 178 | 62.0 Mpa | |
| Tensile modulus | ISO 527-2 | 2000 Mpa | |
| Tensile strain | Yield,23°C | ISO 527-2 | 3.5 % |
| tensile strength | Yield,23°C | ISO 527-2 | 43.0 Mpa |
| Electrical performance | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| Dissipation factor | 1MHz | IEC 60250 | 0.015 |
| Relative permittivity | 1MHz | IEC 60250 | 2.90 |
| Surface resistivity | IEC 60093 | 1E+14 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | 240°C/10.0kg | ISO 1133 | 30.0 cm3/10min |
| Shrinkage rate | ISO 294-4 | 0.80 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 1.2 % |
| impact performance | Test Condition | Test Method | INEOS STYRO KOREA/NM-11 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 无断裂 |
| 23°C | ISO 179 | 无断裂 |