Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM Homopolymer RTP 800 TFE 5 DEL RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 1100 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 53 J/m |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| Primary Additive | 5.0 % |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| tensile strength | ASTM D638 | 62.1 MPa | |
| elongation | 屈服 | ASTM D638 | >10 % |
| Tensile modulus | ASTM D638 | 3030 MPa | |
| Flexural modulus | ASTM D790 | 2620 MPa | |
| bending strength | ASTM D790 | 79.3 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| Volume resistivity | ASTM D257 | >1.0E+15 ohms·cm |
| flammability | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 2.0to3.0 % |
| water content | 0.15 % | ||
| density | ASTM D792 | 1.45 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 800 TFE 5 DEL |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 107 °C |
Contact Us
Get App
Top