PA46 TE250F6-NC PA46 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Certificates

Reference Price

PA46 DSM HOLAND TE250F6-NC

Flame retardant enhanced grade

US$ 9,520 / MT

FOB Guangzhou port, China

mechanical properties	Test Condition	Test Method	DSM HOLAND/TE250F6-NC
tensile strength	Break, 120°C	ISO 527-2	105 Mpa
tensile strength		Break, 160°C	ISO 527-2	95.0 Mpa
Tensile strain	Break, 160°C	ISO 527-2	4.0 %
Bending modulus	--	ISO 178	11000 Mpa
Tensile strain	Break	ISO 527-2	2.5 %
tensile strength	Break	ISO 527-2	180 Mpa
Tensile modulus	--	ISO 527-2	12000 Mpa
Tensile strain	Break, 120°C	ISO 527-2	4.0 %
Tensile modulus	120°C	ISO 527-2	7500 Mpa
Bending modulus	160°C	ISO 178	5000 Mpa
Bending modulus		120°C	ISO 178	6500 Mpa
Tensile modulus	160°C	ISO 527-2	6200 Mpa
thermal performance	Test Condition	Test Method	DSM HOLAND/TE250F6-NC
Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	5.5E-5 cm/cm/°C
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	290 °C
Hot deformation temperature		1.8 MPa, Unannealed	ISO 75-2/A	290 °C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.5E-5 cm/cm/°C
RTI Elec	0.75 mm	UL 746	140 °C
Thermal Index - 5000 hr		IEC 60216	163 °C
Melting temperature		ISO 11357-3	295 °C
Physical properties	Test Condition	Test Method	DSM HOLAND/TE250F6-NC
density		ISO 1183	1.68 g/cm³
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.6 %
Shrinkage rate	Flow	ISO 294-4	0.40 %
Shrinkage rate		横向Flow	ISO 294-4	1.1 %
impact performance	Test Condition	Test Method	DSM HOLAND/TE250F6-NC
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	10 kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	11 kJ/m²
Impact strength of cantilever beam gap		-40°C	ISO 180/1A	11 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	60 kJ/m²
Impact strength of simply supported beam without notch		-30°C	ISO 179/1eU	50 kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	11 kJ/m²
Electrical performance	Test Condition	Test Method	DSM HOLAND/TE250F6-NC
Volume resistivity		IEC 60093	1.0E+15 ohms·cm
Relative permittivity	100 Hz	IEC 60250	4.30
		1 MHz	IEC 60250	4.00
		1.00 GHz	IEC 60250	3.60
Dielectric strength		IEC 60243-1	30 KV/mm
flammability	Test Condition	Test Method	DSM HOLAND/TE250F6-NC
Flammability level		UL 94	V-0

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index