plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
SMMA HX208 LG CHEM KOREA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodLG CHEM KOREA/HX208
Rockwell hardnessM -SaleISO 2039-275
thermal performanceTest ConditionTest MethodLG CHEM KOREA/HX208
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/A90.0 °C
Linear coefficient of thermal expansionFlowASTM D6966.0E-5 cm/cm/°C
Vicat softening temperatureISO 306/B5095.0 °C
mechanical propertiesTest ConditionTest MethodLG CHEM KOREA/HX208
Bending modulusISO 1783100 Mpa
bending strengthISO 178100 Mpa
Tensile modulusISO 527-2/13100 Mpa
Tensile strainBreakISO 527-2/53.0 %
tensile strengthBreakISO 527-2/562.0 Mpa
Physical propertiesTest ConditionTest MethodLG CHEM KOREA/HX208
melt mass-flow rate230°C/3.8 kgISO 11338.0 g/10 min
Shrinkage rateFlowASTM D9550.20 - 0.60 %
Water absorption rate24 hrASTM D5700.12 %
flammabilityTest ConditionTest MethodLG CHEM KOREA/HX208
Flammability levelUL 94HB
optical performanceTest ConditionTest MethodLG CHEM KOREA/HX208
Refractive indexISO 4891.550
transmissivity150000 μm4ISO 13468-182.0 %
3200 μmISO 13468-191.0 %
turbidity150000 μm4ISO 147826.5 %
3200 μmISO 14782< 0.50 %
injectionTest ConditionTest MethodLG CHEM KOREA/HX208
drying temperature< 80 °C
Drying time - hot air dryer3.0 to 4.0 hr
Mold temperature50 to 70 °C
Processing (melt) temperature210 to 240 °C
Temperature at the front of the material cylinder210 to 240 °C
Temperature at the rear of the barrel210 to 240 °C
Temperature in the middle of the barrel210 to 240 °C