Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS PPS GF30 TF15 Bada AG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Bada AG/ PPS GF30 TF15 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 30 kJ/m² |
| Impact strength of simply supported beam without notch | 4.00mm | ASTM D785 | 90.0 J/m |
| Mechanical properties | Test Condition | Test Method | Bada AG/ PPS GF30 TF15 |
|---|---|---|---|
| tensile strength | 断裂,23°C | ISO 527-2/5 | 70.0 MPa |
| Tensile modulus | 23°C | ISO 527-2/1 | 9000 MPa |
| flammability | Test Condition | Test Method | Bada AG/ PPS GF30 TF15 |
|---|---|---|---|
| Burning wire flammability index | 1.6mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 1.6mm | IEC 60695-2-13 | 960 °C |
| UL flame retardant rating | 0.8mm | UL 94 | V-0 |
| Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| Hot filament ignition temperature | 0.75mm | IEC 60695-2-13 | 960 °C |
| Thermal performance | Test Condition | Test Method | Bada AG/ PPS GF30 TF15 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,4.00mm，HDT | ISO 75-2/A | 255 °C |
| melting temperature | ISO 3146 | 280 °C |
Contact Us
Get App
Top