Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 505R SABIC INNOVATIVE US
LEXAN™
Lighting applications、Plastic bag
Middle flow、Thermal stability
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Thermal Conductivity | ISO8302 | 0.21 W/m/K | |
| RTIElec | UL746 | 130 °C | |
| Heat Deflection Temperature | 1.8MPa,Annealed | ISO75-2/Ae | 136 °C |
| 1.8MPa,未退火,3.20mm | ASTMD648 | 138 °C | |
| RTIStr | UL746 | 130 °C | |
| Vicat Softening Temperature | -- | ISO306/B120 | 143 °C |
| Linear thermal expansion coefficient | MD：23到80°C | ISO11359-2 | 4E-05 cm/cm/°C |
| MD：-40到40°C | ASTME831 | 4.7E-05 cm/cm/°C | |
| Ball PressureTest | 125°C | IEC60695-10-2 | Pass |
| Heat Deflection Temperature | 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 136 °C |
| Vicat Softening Temperature | -- | ISO306/B50 | 141 °C |
| Heat Deflection Temperature | 0.45MPa,未退火,3.20mm | ASTMD648 | 143 °C |
| Linear thermal expansion coefficient | TD：-40到40°C | ASTME831 | 8.5E-05 cm/cm/°C |
| Vicat Softening Temperature | ASTMD152514 | 149 °C | |
| Heat Deflection Temperature | 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 144 °C |
| Evolution Calendar intelligent importer | UL746 | 130 °C | |
| Linear thermal expansion coefficient | TD：23to80°C | ISO11359-2 | 7E-05 cm/cm/°C |
| Hardness | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Ball Indentation Hardness | H358/30 | ISO2039-1 | 115 Mpa |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Density / Specific Gravity | ISO1183 | 1.25 g/cm³ | |
| Moisture Absorption | 平衡,23°C,50%RH | ISO62 | 0.13 % |
| Density / Specific Gravity | ASTMD792 | 1.26 g/cm³ | |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 7.0 g/10min |
| Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 7.00 cm3/10min |
| Moisture Absorption | 饱和,23°C | ISO62 | 0.31 % |
| Modeling Shrinkage | MD：--2 | 内部方法 | 0.20to0.60 % |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Taber Abrasion Resistance | 1000Cycles,1000g,CS-17转轮 | 内部方法 | 11.0 mg |
| Tensile Elongation | 断裂 | ASTMD638 | 12 % |
| Tensile Strain | 断裂 | ISO527-2/5 | 7.0 % |
| Tensile Modulus | ISO527-2/1 | 3300 Mpa | |
| Tensile Strength | 屈服 | ASTMD638 | 63.0 Mpa |
| Tensile Stress | 断裂 | ISO527-2/5 | 45.0 Mpa |
| Flexural Modulus | 50.0mmSpan | ASTMD790 | 3530 Mpa |
| ISO178 | 3400 Mpa | ||
| Tensile Elongation | 屈服 | ASTMD638 | 3.0 % |
| Flexural Strength | Break,50.0mmSpan | ASTMD790 | 108 Mpa |
| ISO178 | 95.0 Mpa | ||
| Tensile Modulus | ASTMD638 | 3930 Mpa | |
| Tensile Strength | Break | ASTMD638 | 48.0 Mpa |
| Tensile Strain | 屈服 | ISO527-2/5 | 5.0 % |
| Tensile Stress | 屈服 | ISO527-2/5 | 60.0 Mpa |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 23°C8 | ISO179/1eU | NoBreak |
| Notched Izod Impact Strength | 23°C10 | ISO180/1A | 8.0 kJ/m² |
| Notched Izod impact strength | 23°C11 | ISO180/1U | NoBreak |
| Notched Izod Impact Strength | 23°C | ASTMD256 | 110 J/m |
| -30°C10 | ISO180/1A | 8.0 kJ/m² | |
| 23°C11 | ISO180/1A | 10 kJ/m² | |
| 23°C | ASTMD4812 | 1600 J/m | |
| -30°C11 | ISO180/1A | 8.0 kJ/m² | |
| Notched Izod impact strength | 23°C10 | ISO180/1U | NoBreak |
| Notched Izod Impact Strength | -30°C | ASTMD256 | 80 J/m |
| Notched Izod impact strength | -30°C11 | ISO180/1U | 130 kJ/m² |
| Charpy Notched Impact Strength | -30°C8 | ISO179/1eA | 9.0 kJ/m² |
| Charpy Unnotched Impact Strength | -30°C8 | ISO179/1eU | NoBreak |
| -30°C9 | ISO179/1eU | NoBreak | |
| Charpy Notched Impact Strength | 23°C | ISO179/2C | 15 kJ/m² |
| Notched Izod impact strength | -30°C10 | ISO180/1U | NoBreak |
| Charpy Notched Impact Strength | 23°C8 | ISO179/1eA | 10 kJ/m² |
| 23°C9 | ISO179/1eA | 9.0 kJ/m² | |
| Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 61.0 J |
| Charpy Unnotched Impact Strength | 23°C9 | ISO179/1eU | NoBreak |
| Flammability | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Glow Wire Ignition Temperature | 1.0mm | IEC60695-2-13 | 825 °C |
| Flame Rating | 1.5mm | UL94 | V-0 |
| 3.0mm | UL94 | 5VA | |
| Oxygen Index | ISO4589-2 | 37 % | |
| Glow Wire Flammability Index | 1.0mm | IEC60695-2-12 | 960 °C |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/505R |
|---|---|---|---|
| Dielectric Strength | 3.20mm,在油中 | IEC60243-1 | 16 KV/mm |
| Dissipation Factor? | 1MHz | IEC60250 | 0.010 |
| Dielectric Strength | 1.60mm,在油中 | IEC60243-1 | 25 KV/mm |
| Volume Resistivity | IEC60093 | >1.0E+15 ohms·cm | |
| Comparative Tracking Index | IEC60112 | 150 V | |
| Dissipation Factor? | 60Hz | IEC60250 | 1E-03 |
| Dielectric Strength | 0.800mm,在油中 | IEC60243-1 | 33 KV/mm |
| Relative Permittivity | 50Hz | IEC60250 | 2.90 |
| Surface Resistivity | IEC60093 | >1.0E+15 ohms | |
| Relative Permittivity | 1MHz | IEC60250 | 2.80 |
| Dissipation Factor? | 50Hz | IEC60250 | 1E-03 |
| Relative Permittivity | 60Hz | IEC60250 | 2.90 |
Contact Us
Get App
Top