Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM LO-21 MITSUBISHI ENGINEERING JAPAN
Iupital™
Automotive sector,Electronic and Electrical Applications
High rigidity,Adding lubricants
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LO-21 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.2mm | ASTM D256 | 59 J/m |
| Rockwell hardness | ASTM D785 | 80 M | |
| tensile strength | 23℃ | ASTM D638 | 56.9 Mpa |
| bending strength | 23℃ | ASTM D790 | 80.4 Mpa |
| Flexural modulus | 23℃ | ASTM D790 | 2.45 GPa |
| Stretching length | 23℃ | ASTM D638 | 50 % |
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LO-21 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1×10 | |
| Volume resistivity | ASTM D257 | 1×10 |
| physical property | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LO-21 |
|---|---|---|---|
| Shrinkage rate | 平行方向 | 2.0 % | |
| Water absorption rate | ASTM D570 | 0.22 % | |
| melt mass-flow rate | ASTM D1238 | 10.0 g/10min |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/LO-21 |
|---|---|---|---|
| Heat distortion temperature | 820Kpa，HDT | ASTM D648 | 110 °C |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top