Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 GW350 ASCEND USA
Vydyne®
Electrical appliances,Electrical enclosure,switch,Fasteners,Electrical/Electronic Applications,Spool,Vehicle electronics,Lighting applications,printed circuit board,Laptop case,Movable hinge,Industrial applications,Electrical components
--
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | ASCEND USA/GW350 |
|---|---|---|---|
| High Voltage Arc Traceability Rate (HVTR) | 3.00mm | UL 746 | PLC 4 |
| arc resistance | 3.00mm | ASTM D495 | PLC 5 |
| Hot wire ignition (HWI) | 0.40mm | UL 746 | PLC 4 |
| 0.75mm | UL 746 | PLC 4 | |
| 1.5mm | UL 746 | PLC 0 | |
| High arc combustion index (HAI) | 0.40mm | UL 746 | PLC 0 |
| 1.5mm | UL 746 | PLC 0 | |
| Compared to the Leakage Tracking Index (CTI) | 3.00mm | IEC 60112 | V |
| Hot wire ignition (HWI) | 3.0mm | UL 746 | PLC 0 |
| dielectric strength | 1.00mm | IEC 60243 | 14 KV/mm |
| High arc combustion index (HAI) | 3.0mm | UL 746 | PLC 0 |
| 0.75mm | UL 746 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | ASCEND USA/GW350 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2 | 17 % |
| Flexural modulus | 23°C | ISO 178 | 3340 Mpa |
| tensile strength | 断裂,23°C | ISO 527-2 | 83.0 Mpa |
| Poisson's ratio | ISO 527-2 | 0.40 |
| flammability | Test Condition | Test Method | ASCEND USA/GW350 |
|---|---|---|---|
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 0.75mm | UL 94 | V-2 |
| Burning wire flammability index | 0.40mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 3.0mm | UL 94 | V-2 |
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 825 °C |
| 1.5mm | IEC 60695-2-13 | 850 °C | |
| 0.40mm | IEC 60695-2-13 | 930 °C | |
| Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| Hot filament ignition temperature | 0.75mm | IEC 60695-2-13 | 900 °C |
| UL flame retardant rating | 0.40mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | ASCEND USA/GW350 |
|---|---|---|---|
| Shrinkage rate | MD:23°C,2.00mm | ISO 294-4 | 1.3 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 2.1 % |
| Shrinkage rate | TD:23°C,2.00mm | ISO 294-4 | 1.8 % |
| Thermal performance | Test Condition | Test Method | ASCEND USA/GW350 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 263 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 65.0 °C |
Contact Us
Get App
Top