Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 330HR-ED3002 JAPAN POLYPLASTIC
DURANEX®
Automotive Applications
Hydrolysis resistance,30%GF,Filler: Glass fiber reinf,30%,Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| ColourNumber | EF2001/ED3002 |
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 100 |
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 209 °C |
| 1.8Mpa | ISO 75-1/-2 | 209 °C | |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 2E-05 cm/cm/°C |
| Across Flow | ISO 11359-2 | 9 | |
| Flow | ISO 11359-2 | 2 | |
| TD:23to55°C | Internal Method | 9E-05 cm/cm/°C | |
| UL flame retardant rating | UL 94 | HB |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| Bending modulus | ISO 178 | 9100 Mpa | |
| bending strength | ISO 178 | 230 Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 11.0 KJ/m | |
| Tensile strain | Break | ISO 527-2 | 2.6 % |
| tensile strength | ISO 527-1/-2 | 149 Mpa | |
| ISO 527-2 | 149 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| Dielectric strength | 3.00mm | IEC 60243-1 | 26 KV/mm |
| Volume resistivity | IEC 60093 | 2E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/330HR-ED3002 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |