Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

SEBS G7720 KRATON USA
KRATON™
Household daily necessities,sealant,adhesive
antioxidant,Weather resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| ozone resistance | 38°C | ASTM D518/1149 | NoCracking |
| hardness | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| Shore hardness | ShoreA | Internal Method | 52to62 |
| ShoreA,10Sec | Internal Method | 57 | |
| ShoreA2 | Internal Method | 62 |
| thermal performance | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| Brittle temperature | ASTM D746 | -63.0 °C |
| Physical properties | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.4 % |
| flammability | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| Burning rate | FMVSS302 | 51 mm/min |
| elastomer | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| Elongation at Break | Break,3.18mm,Flow | ASTM D412 | 700 % |
| Permanent compression deformation | 23°C,22hr | ASTM D395B | 15 % |
| 70°C,22hr | ASTM D395B | 38 % | |
| tear strength | 3.18mm | ASTM D624 | 26.3 kN/m |
| tensile strength | Yield,3.18mm,TD | ASTM D412 | 5.52 Mpa |
| Tensile stress | 100%Strain,3.18mm,TD | ASTM D412 | 1.38 Mpa |
| 500%Strain,TD | ASTM D412 | 3.45 Mpa | |
| 300%Strain,3.18mm,TD | ASTM D412 | 2.07 Mpa |
| aging | Test Condition | Test Method | KRATON USA/G7720 |
|---|---|---|---|
| Change rate of hardness (Shore) in the air | 支撐A | ASTM D573 | 2.0 |
| Change rate of tensile strength in air | 150°C,168hr | ASTM D573 | 140 % |
| Change rate of ultimate elongation in air | ASTM D573 | 130 % |