Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEEK LC006EX1-BKNAT SABIC INNOVATIVE NANSHA
LNP™ THERMOCOMP™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/LC006EX1-BKNAT |
---|---|---|---|
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 43 kJ/m² |
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.8 kJ/m² |
Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 12.5 J |
Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/LC006EX1-BKNAT |
---|---|---|---|
Tensile modulus | ISO 527-2/1 | 24700 Mpa | |
bending strength | ASTM D790 | 325 Mpa | |
Wear factor | Washer | ASTM D3702Modified | 55.0 10^-10in^5-min/ft-lb-hr |
tensile strength | 断裂 | ASTM D638 | 226 Mpa |
断裂 | ISO 527-2 | 230 Mpa | |
Flexural modulus | ASTM D790 | 20200 Mpa | |
Tensile modulus | ASTM D638 | 30800 Mpa | |
elongation | 断裂 | ASTM D638 | 1.5 % |
bending strength | ISO 178 | 347 Mpa | |
coefficient of friction | Static | ASTM D3702Modified | 0.32 |
Tensile strain | 断裂 | ISO 527-2 | 1.5 % |
Flexural modulus | ISO 178 | 24300 Mpa | |
coefficient of friction | Dynamic | ASTM D3702Modified | 0.30 |
flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/LC006EX1-BKNAT |
---|---|---|---|
UL flame retardant rating | 0.77mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/LC006EX1-BKNAT |
---|---|---|---|
Shrinkage rate | MD:24小时 | ISO 294-4 | 0.12 % |
MD:24小时 | ASTM D955 | 0.10 % | |
Water absorption rate | 24hr,50%RH | ASTM D570 | 0.080 % |
平衡,23°C,50%RH | ISO 62 | 0.070 % | |
Shrinkage rate | TD:24hr | ASTM D955 | 0.40 % |
TD:24小时 | ISO 294-4 | 0.40 % |
Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/LC006EX1-BKNAT |
---|---|---|---|
Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan,HDT | ISO 75-2/Bf | >240 °C |
Linear coefficient of thermal expansion | TD:-40到40°C | ASTME831 | 2.9E-05 cm/cm/°C |
TD:-40到40°C | ISO 11359-2 | 2.9E-05 cm/cm/°C | |
MD:-40到40°C | ASTME831 | 1.2E-05 cm/cm/°C | |
Heat distortion temperature | 0.45MPa,未退火,3.20mm,HDT | ASTM D648 | >299 °C |
Linear coefficient of thermal expansion | MD:-40到40°C | ISO 11359-2 | 1.2E-05 cm/cm/°C |
Heat distortion temperature | 1.8MPa,未退火,64.0mm跨距,HDT | ISO 75-2/Af | >240 °C |
1.8MPa,未退火,3.20mm,HDT | ASTM D648 | >299 °C |
Contact Us
Get App
Top