Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Adell Polyamide AT-17 ADELL USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADELL USA/Adell Polyamide AT-17 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 130 J/m |
| hardness | Test Condition | Test Method | ADELL USA/Adell Polyamide AT-17 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 95 |
| R级 | ASTM D785 | 121 |
| Mechanical properties | Test Condition | Test Method | ADELL USA/Adell Polyamide AT-17 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0to4.0 % |
| tensile strength | ASTM D638 | 152 MPa | |
| compressive strength | ASTM D695 | 179 MPa | |
| Flexural modulus | ASTM D790 | 6890 MPa | |
| bending strength | ASTM D790 | 228 MPa |
| flammability | Test Condition | Test Method | ADELL USA/Adell Polyamide AT-17 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | ADELL USA/Adell Polyamide AT-17 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20to0.50 % |
| Water absorption rate | 24hr | ASTM D570 | 0.50 % |
| density | ASTM D792 | 1.34to1.36 g/cm³ |
| Thermal performance | Test Condition | Test Method | ADELL USA/Adell Polyamide AT-17 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 246 °C |
| melting temperature | ASTM D789 | 249to260 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | >249 °C |
Contact Us
Get App
Top