Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Rubber Techsil® IS803 Techsil Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| Young's modulus | 0.700 MPa | ||
| CureTime | 23°C,3.00mm | 7.0 hr | |
| Extrusion rate | 270 g/min |
| hardness | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| IRHD hardness | BS903 | 38 |
| film | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| peelstrength | 5.3 kN/m |
| Electrical performance | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 18 kV/mm | |
| Surface Resistivity | ASTM D257 | 3.6E+15 ohms | |
| Dissipation Factor | 1MHz | ASTM D150 | 2.5E-03 |
| dielectric constant | 1MHz | ASTM D150 | 3.00 |
| thermosetting | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| surface drying time | 23°C | 4.0 min |
| physical property | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| Shrinkage rate | MD | <0.80 % | |
| density | BS903 | 1.07 g/cm³ |
| elastomer | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| tensile strength | 100%应变 | BS903 | 0.940 MPa |
| tear strength | BS903 | 5.50 kN/m | |
| tensile strength | 屈服 | BS903 | 2.30 MPa |
| elongation | 断裂 | BS903 | 290 % |
| Thermal performance | Test Condition | Test Method | Techsil Limited/Techsil® IS803 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | 3.1E-04 cm/cm/°C | |
| ServiceTemperature5 | -60-300 °C | ||
| TD | 9.4E-04 cm/cm/°C | ||
| 导热系数 | 0.20 W/m/K |
Contact Us
Get App
Top