Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM F30-03 KEP KOREA
KEPITAL®
Thin walled products、currency、Thin walled components
High mobility、Thermal stability、wear resistant、High rigidity、High impact resistance、currency
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | KEP KOREA/F30-03 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.5 kJ/m² |
| -30°C | ISO 179/1eA | 5.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | KEP KOREA/F30-03 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2850 Mpa | |
| bending strength | ISO 178 | 90.0 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 25 % |
| Flexural modulus | ISO 178 | 2700 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 8.0 % |
| tensile strength | ISO 527-2 | 65.0 Mpa |
| Electrical performance | Test Condition | Test Method | KEP KOREA/F30-03 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 19 KV/mm | |
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+16 ohms |
| flammability | Test Condition | Test Method | KEP KOREA/F30-03 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | KEP KOREA/F30-03 |
|---|---|---|---|
| Shrinkage rate | MD：3.00mm | 内部方法 | 2.0 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
| density | ISO 1183 | 1.41 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 27 g/10min |
| Thermal performance | Test Condition | Test Method | KEP KOREA/F30-03 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 165 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 101 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.2E-04 cm/cm/°C |
Contact Us
Get App
Top