Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B30S BASF GERMANY
Ultramid®
Thin walled components、Plastic accessories、Shell
High mobility、Oil resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | BASF GERMANY/B30S |
|---|---|---|---|
| ball-indentation hardness | ISO 2039 | （140干态）（50湿态） n/mm² |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/B30S |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23℃ | ISO 180 | （NB干态）（NB湿态) kJ/m² |
| Tensile creep modulus | 1hr | ISO 899 | （800湿态） Mpa |
| Suspended wall beam without notch impact strength | -30℃ | ISO 180 | （NB干态）（NB湿态) kJ/m² |
| Puncture Resistance | 最大力23℃ | ISO 6603 | 5900 N |
| elongation | 断裂50mm/min | ISO 527 | （20干态）（50湿态） % |
| Flexural modulus | 2.0mm/min | ISO 178 | （2900干态）（850湿态） Mpa |
| bending strength | 3.5%应变 2.0mm/min | ISO 178 | （95干态）（25湿态） Mpa |
| Tensile modulus | 1.0mm/min | ISO 527 | （3200干态）（1000湿态） Mpa |
| Bending Strain | 2.0mm/min | ISO 178 | （6干态）（8湿态） % |
| elongation | 屈服50mm/min | ISO 527 | （4干态）（20湿态） % |
| Tensile creep modulus | 1000hr | ISO 899 | （600湿态） Mpa |
| Charpy Notched Impact Strength | -30℃ | ISO 179 | （NB干态）（NB湿态) kJ/m² |
| Puncture Resistance | 最大力-30℃ | ISO 6603 | 7300 N |
| bending strength | 2.0mm/min | ISO 178 | （110干态）（35湿态） Mpa |
| Puncture Resistance | -30℃ | ISO 6603 | 85 J |
| Charpy Notched Impact Strength | -30°C | ISO 179 | （10干态）（10湿态) kJ/m² |
| tensile strength | 屈服50mm/min | ISO 527 | （80干态）（40湿态） Mpa |
| Charpy Notched Impact Strength | 23℃ | ISO 179 | （NB干态）（NB湿态) kJ/m² |
| Impact strength of cantilever beam gap | 23℃ | ISO 180 | （10干态）（30湿态） kJ/m² |
| Puncture Resistance | 23℃ | ISO 6603 | 90 J |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/B30S |
|---|---|---|---|
| dielectric constant | 100Hz | IEC 60250 | （4干态）（15湿态） |
| Volume resistivity | IEC 60093 | （10000000000000干态）（10000000000湿态） Ω.m | |
| Dissipation Factor | 100Hz | IEC 60250 | （0.017干态）（0.2湿态） |
| Surface Resistivity | IEC 60093 | （100000000000000干态）（10000000000000湿态） Ω | |
| dielectric strength | 1.0mm | IEC 60243 | （30干态）（30湿态） KV/mm |
| dielectric constant | 1MHz | IEC 60250 | （3.5干态）（4湿态） |
| Compared to the Leakage Tracking Index (CTI) | 溶液A | IEC 60112 | V |
| M溶液B | IEC 60112 | V | |
| Dissipation Factor | 1MHz | IEC 60250 | （0.02干态）（0.12湿态） |
| Flame retardant performance | Test Condition | Test Method | BASF GERMANY/B30S |
|---|---|---|---|
| UL flame retardant rating | 638mm | UL 94 | V-2 |
| Relative temperature of heating wire | 2.0mm | IEC 60695 | 750 °C |
| Limiting Oxygen Index | 方法A | ISO 4589 | 26 % |
| UL flame retardant rating | 6.0mm | UL 94 | V-2 |
| 3.0mm | UL 94 | U2 | |
| 1.5mm | UL 94 | \A2 |
| physical property | Test Condition | Test Method | BASF GERMANY/B30S |
|---|---|---|---|
| density | ISO 1183 | 1140 kg/㎥ | |
| Shrinkage rate | 流动 150xW5x3mm120°C4hr | ISO 2577 | 0.32 % |
| Water absorption rate | 23℃ | ISO 62 | 10 % |
| Shrinkage rate | 流动150x105x3mm 270℃ 50MPa模具温 度:80℃ | ISO 2577 | 1.02 % |
| Apparent density | ISO 60 | 700 kg/㎥ | |
| Shrinkage rate | 垂直150x105x3mm 270°C 50Mpa模具温 度:80℃ | ISO 2577 | 1.16 % |
| 垂直 150x105x3mm 120°C4hr | ISO 2577 | 0.4 % | |
| Water absorption rate | 23℃50RH平衡 | ISO 62 | 3 % |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/B30S |
|---|---|---|---|
| Linear coefficient of thermal expansion | 垂直23~55℃ | ISO 11359 | 0.00011 cm/cm/℃ |
| Heat distortion temperature | 1.8MPa，HDT | ISO 75 | 55 °C |
| melting temperature | 10℃/min | ISO 11357 | 222 °C |
| Linear coefficient of thermal expansion | 流动23~550℃ | ISO 11359 | 0.00010 cm/cm/℃ |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75 | 160 °C |
| vicat | 120℃/hr 50N | ISO 306 | 200 °C |
| 50℃/hr 50N | ISO 306 | 200 °C | |
| Heat distortion temperature | 8.0MPa，HDT | ISO 75 | 45 °C |
Contact Us
Get App
Top