Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS Electrafil® PC/ABS Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC/ABS |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 590 J/m |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 64 J/m |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC/ABS |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 7.0 % |
| Flexural modulus | ASTM D790 | 3030 MPa | |
| tensile strength | 屈服 | ASTM D638 | 55.8 MPa |
| bending strength | ASTM D790 | 88.9 MPa |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC/ABS |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1.0E+2to1.0E+6 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1.0E+2to1.0E+6 ohms | |
| StaticDecay | FTMS101B | <0.1 sec | |
| Electromagnetic shielding effectiveness (EMI) | ASTM D4935 | 35 dB |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC/ABS |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC/ABS |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| density | ASTM D792 | 1.20 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.50 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC/ABS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 98.9 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 4E-05 cm/cm/°C |
Contact Us
Get App
Top