plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM 127UV DUPONT USA
Delrin®
Medical supplies
High temperature resistan,Flame retardant,enhance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodDUPONT USA/127UV
Rockwell hardnessM-SaleISO 2039-292
R-SaleISO 2039-2120
Supplementary InformationTest ConditionTest MethodDUPONT USA/127UV
EmissionVDA275<8.00 mg/kg
EmissionofOrganicCompoundsVDA27716.0 µgC/g
OdorVDA2703.00
thermal performanceTest ConditionTest MethodDUPONT USA/127UV
AnnealingTemperature160 °C
AnnealingTime-Optional30.0 min/mm
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B160 °C
1.8MPa,UnannealedISO 75-2/A93.0 °C
Linear coefficient of thermal expansionTDISO 11359-21.1E-04 cm/cm/°C
MDISO 11359-21.2E-04 cm/cm/°C
Melting temperatureISO 11357-3178 °C
Vicat softening temperatureISO 306/B50160 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/127UV
Bending modulusISO 1782700 Mpa
bending strength3.5%StrainISO 17880.5 Mpa
--ISO 17872.0 Mpa
Nominal tensile fracture strainISO 527-245 %
Tensile modulusISO 527-23000 Mpa
Tensile strainYieldISO 527-223 %
tensile strengthYieldISO 527-270.0 Mpa
Electrical performanceTest ConditionTest MethodDUPONT USA/127UV
Compared to the anti leakage trace indexIEC 60112PLC 0
Relative permittivity100HzIEC 602503.50
1MHzIEC 602503.40
Volume resistivityIEC 600931E+13 ohms·cm
Physical propertiesTest ConditionTest MethodDUPONT USA/127UV
densityISO 11831.42 g/cm³
melt mass-flow rate190°C/2.16kgISO 11332.4 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11331.90 cm3/10min
Shrinkage rateMDISO 294-42.1 %
TDISO 294-41.9 %
Water absorption rateEquilibrium,23°C,2.00mm,50%RHISO 620.30 %
23°C,24hrISO 620.50 %
Saturation,23°C,2.00mmISO 621.2 %
impact performanceTest ConditionTest MethodDUPONT USA/127UV
Charpy Notched Impact Strength23°CISO 179/1eA15 kJ/m²
-30°CISO 179/1eA11 kJ/m²
Impact strength of cantilever beam gap-40°CISO 180/1A11 kJ/m²
23°CISO 180/1A13 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU350 kJ/m²
23°CISO 179/1eU400 kJ/m²
flammabilityTest ConditionTest MethodDUPONT USA/127UV
Burning rate1.00mmISO 379528 mm/min
FMVSS flammabilityFMVSS302B
Fogging-G-valuecondensateISO 64521.5E-04 g
UL flame retardant rating0.8mmIEC 60695-11-10,-20HB
0.8mmUL 94HB

Contact Us

Get App

Top