Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified LUBLENE GF30 NATURAL LUBEN PLAST srl
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LUBEN PLAST srl/LUBLENE GF30 NATURAL |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C4 | ASTM D256 | 5.0-6.0 kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.0-6.0 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 30to40 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 30to40 kJ/m² |
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256A | 50to60 J/m |
| 23°C | ISO 180/A | 5.0-6.0 kJ/m² | |
| 23°C3 | ASTM D256 | 30to40 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LUBEN PLAST srl/LUBLENE GF30 NATURAL |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1A/1 | 5000to6000 MPa | |
| tensile strength | 断裂 | ISO 527-2/1A/5 | 70.0to80.0 MPa |
| Tensile strain | 屈服 | ISO 527-2/1A/5 | 2.0to2.5 % |
| tensile strength | 屈服 | ISO 527-2/1A/5 | 70.0to80.0 MPa |
| Tensile strain | 断裂 | ISO 527-2/1A/5 | 2.0to2.5 % |
| Flexural modulus | ISO 178 | 4500to5500 MPa | |
| bending strength | ISO 178 | 80.0to90.0 MPa |
| physical property | Test Condition | Test Method | LUBEN PLAST srl/LUBLENE GF30 NATURAL |
|---|---|---|---|
| density | ISO 1183/A | 1.10to1.14 g/cm³ |
| Thermal performance | Test Condition | Test Method | LUBEN PLAST srl/LUBLENE GF30 NATURAL |
|---|---|---|---|
| vicat | -- | ISO 306/B120 | 125to135 °C |
| melting temperature | 内部方法 | 165to170 °C | |
| vicat | -- | ISO 306/A120 | 155to165 °C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 145to155 °C |
| 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 145to155 °C | |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 130to140 °C |
Contact Us
Get App
Top