Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS FR110-000000 COVESTRO THAILAND
Bayblend®
--
Flame retardant、Photostability、White hot metal wire temp、Good light stability、Injection grade、Flame retardants do not c、Chlorine and bromine
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| Water absorption rate | 23℃/50%相对湿度 | ISO 62 | 0.2 % |
| 23℃饱和吸水 | ISO 62 | 0.5 % |
| Basic performance | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| density | ISO 1183 | 1190 kg/m |
| Mechanical properties | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| elongation at break | 50mm/min | ISO 527 | >50 % |
| Tensile strain | 50mm/min，屈服 | ISO 527 | 4 % |
| Impact strength of cantilever beam gap | 23℃ | ISO 180-1U | N KJ/m |
| Tensile modulus | 1mm/min | ISO 527 | 2600 Mpa |
| Impact strength of cantilever beam gap | 23℃ | ISO 180-1A | 50 KJ/m |
| -30℃ | ISO 180-1A | 15 KJ/m | |
| Tensile stress | 50mm/min，屈服 | ISO 527 | 60 Mpa |
| tensile strength | 50mm/min | ISO 527 | 50 Mpa |
| Electrical performance | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| Volume resistivity | IEC 93 | 1E+15 Ω.m | |
| Dissipation Factor | 1MHZ | IEC 250 | 80 0.0001 |
| dielectric constant | 1MHZ | IEC 250 | 3.1 |
| dielectric strength | IEC 243-1 | 30 KV/mm | |
| Compared to the Leakage Traceability Index (CTI) | 溶液A | IEC 112 | 500 等级 |
| Dissipation Factor | 100HZ | IEC 250 | 30 0.0001 |
| Surface Resistivity | IEC 93 | 1E+14 Ω | |
| dielectric constant | 100HZ | IEC 250 | 3.2 |
| processability | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| Temperature | ISO 294 | 80 °C | |
| Melt Temperature | ISO 294 | 240 °C | |
| injection speed | ISO 294 | 240 mm/s |
| physical property | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| Shrinkage rate | 垂直流动方向，500bar | ISO 2577 | 0.4-0.6 % |
| spiral flow length | 260℃，2×8.7mm | 380 mm | |
| Shrinkage rate | 流动方向，500bar | ISO 2577 | 0.4-0.6 % |
| melt mass-flow rate | 240℃ | ISO 1133 | 20 CM |
| Thermal performance | Test Condition | Test Method | COVESTRO THAILAND/FR110-000000 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa，HDT | ISO 75 | 90 °C |
| vicat | 50N;50K/h | ISO 306 | 108 °C |
| Linear coefficient of thermal expansion | 流动方向，23至55℃ | ASTM E 831 | 0.76 10 |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75 | 100 °C |
| Linear coefficient of thermal expansion | 垂直流动方向，23至55℃ | ASTM E 831 | 0.80 10 |
Contact Us
Get App
Top