Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 66G33 BK DOMO CHEM GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
Suspended wall beam without notch impact strength23°CISO 180/1U65 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU70 kJ/m²
Mechanical propertiesTest ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
Tensile modulusISO 527-2/110000 Mpa
tensile strength 断裂ISO 527-2/5185 Mpa
bending strengthISO 178275 Mpa
Flexural modulusISO 1788700 Mpa
Tensile strain断裂ISO 527-2/53.0 %
Electrical performanceTest ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
Volume resistivityIEC 600931.0E+15 ohms·cm
Compared to the Leakage Tracking Index (CTI)解决方案 AIEC 60112PLC 1
Surface ResistivityIEC 600931.0E+13 ohms
flammabilityTest ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
burning rateFMVSS 302< 100 mm/min
UL flame retardant rating0.8 mmUL 94HB
Burning wire flammability index1.0 到 3.0 mmIEC 60695-2-12650 °C
ISO 9660ISO 1874PA6.M.14-100.GF33
physical property Test ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
Shrinkage rate流量 : 23°C, 72小时ISO 25770.20 - 0.40 %
viscosity number96% H2SO4ISO 307145 cm³/g
Shrinkage rate横向流量 : 23°C, 72小时ISO 25770.60 - 0.80 %
Thermal performanceTest ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
melting temperatureISO 11357-3262 °C
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/B255 °C
vicatISO 306/B50255 °C
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/A250 °C
injectionTest ConditionTest MethodDOMO CHEM GERMANY/66G33 BK
drying time2.0 to 4.0 hr
Processing (melt) temperature270 to 290 °C
drying temperature75 to 85 °C
Temperature90 to 110 °C

Contact Us

Get App

Top