Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Nycast GF Cast Nylons Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Cast Nylons Ltd./Nycast GF |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 32to48 J/m |
| hardness | Test Condition | Test Method | Cast Nylons Ltd./Nycast GF |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 84to85 |
| Rockwell hardness | R级 | ASTM D785 | 116to120 |
| Mechanical properties | Test Condition | Test Method | Cast Nylons Ltd./Nycast GF |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.0to5.5 % |
| tensile strength | ASTM D638 | 66.9to79.3 MPa | |
| Heat distortion temperature | HDT | ASTM D621 | 0.400 % |
| compressive strength | ASTM D695 | 117to121 MPa | |
| Compression Modulus | ASTM D695 | 2830to3070 MPa | |
| Tensile modulus | ASTM D638 | 3790to5170 MPa | |
| Flexural modulus | ASTM D790 | 3450to3930 MPa | |
| bending strength | ASTM D790 | 121to128 MPa |
| physical property | Test Condition | Test Method | Cast Nylons Ltd./Nycast GF |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D570 | 1.1to1.2 % |
| 24hr | ASTM D570 | 0.50to0.60 % | |
| density | ASTM D792 | 1.32 g/cm³ |
| Thermal performance | Test Condition | Test Method | Cast Nylons Ltd./Nycast GF |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 118to124 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 182to188 °C | |
| Continuous use temperature | ASTM D794 | 110 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 6.8E-05 cm/cm/°C |
| melting temperature | 259to261 °C | ||
| Usage temperature | 间歇 | 166 °C |
Contact Us
Get App
Top