Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PVC Alloy Generic PVC Alloy Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| Dart impact | 23°C | ASTM D4226 | 50.4to178 J/cm |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 27to960 J/m |
| hardness | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| Shore hardness | 23°C | ASTM D2240 | 60to80 |
| Mechanical properties | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 48.3to93.1 MPa |
| Tensile modulus | 23°C | ASTM D638 | 1890to2420 MPa |
| Flexural modulus | 23°C | ASTM D790 | 1890to2840 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 29.6to46.6 MPa |
| elongation | 断裂,23°C | ASTM D638 | 15to380 % |
| physical property | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| spiral flow length | 58.4to87.0 cm | ||
| Shrinkage rate | MD：23°C | ASTM D955 | 0.35to0.36 % |
| density | ASTM D792 | 1.15to1.49 g/cm³ |
| elastomer | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| tear strength | 23°C | ASTM D624 | 8.00to71.9 kN/m |
| aging | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| volume change | 23°C | ASTM D471 | -26--0.30 % |
| Thermal performance | Test Condition | Test Method | Generic/Generic PVC Alloy |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 72.4to85.1 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 76.0to90.6 °C | |
| 1.8MPa,退火，HDT | ASTM D648 | 73.0to88.0 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.0E-5到1.4E-4 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,退火，HDT | ASTM D648 | 83.9to92.4 °C |
Contact Us
Get App
Top