Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT T08 200 DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM Additive Manufacturing/ T08 200
Charpy Notched Impact Strength23°CISO 179/1eA6.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
23°CISO 179/1eUNoBreak
Charpy Notched Impact Strength-30°CISO 179/1eA6.0 kJ/m²
Mechanical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ T08 200
Nominal tensile fracture strainISO 527-2>50 %
Tensile modulusISO 527-22550 MPa
Tensile strain屈服ISO 527-23.5 %
tensile strength 屈服ISO 527-255.0 MPa
Electrical performanceTest ConditionTest MethodDSM Additive Manufacturing/ T08 200
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric strengthIEC 60243-127 kV/mm
Volume resistivityIEC 60093>1.0E+15 ohms·cm
relative permittivity100HzIEC 602503.50
Dissipation Factor100HzIEC 602502E-03
relative permittivity1MHzIEC 602503.20
Dissipation Factor1MHzIEC 602500.020
flammabilityTest ConditionTest MethodDSM Additive Manufacturing/ T08 200
UL flame retardant rating0.75mmIEC 60695-11-10,-20HB
1.5mmIEC 60695-11-10,-20HB
physical property Test ConditionTest MethodDSM Additive Manufacturing/ T08 200
Water absorption rate平衡,23°C,50%RHISO 620.18 %
饱和,23°CISO 620.45 %
densityISO 11831.30 g/cm³
Melt volume flow rate250°C/2.16kgISO 113310.0 cm³/10min
Thermal performanceTest ConditionTest MethodDSM Additive Manufacturing/ T08 200
melting temperatureISO 11357-3225 °C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B170 °C
1.8MPa,未退火，HDTISO 75-2/A55.0 °C
Linear coefficient of thermal expansionMDISO 11359-29E-05 cm/cm/°C
TDISO 11359-29E-05 cm/cm/°C

Contact Us

Get App

Top