Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 K224-LGM35 ENVALIOR JIANGSU
Akulon®
--
Glass fiber reinforced、Lubricity、UV resistance、Mineral reinforcement、Filler: DSM DSM Netherlan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENVALIOR JIANGSU/K224-LGM35 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 30 kJ/m² |
| -30°C | ISO 179/1eU | 25 kJ/m² |
| Mechanical properties | Test Condition | Test Method | ENVALIOR JIANGSU/K224-LGM35 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 9000 Mpa | |
| bending strength | ISO 178 | 165 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| Flexural modulus | ISO 178 | 7700 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 120 Mpa |
| Electrical performance | Test Condition | Test Method | ENVALIOR JIANGSU/K224-LGM35 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 35 KV/mm | |
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 3.50 |
| Dissipation Factor | 100Hz | IEC 60250 | 5E-03 |
| relative permittivity | 1MHz | IEC 60250 | 3.30 |
| Surface Resistivity | IEC 60093 | -- ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.014 |
| physical property | Test Condition | Test Method | ENVALIOR JIANGSU/K224-LGM35 |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 1.7 % |
| Thermal performance | Test Condition | Test Method | ENVALIOR JIANGSU/K224-LGM35 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 215 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 205 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.8E-05 cm/cm/°C |
| TD | ISO 11359-2 | 1E-04 cm/cm/°C |
Contact Us
Get App
Top