Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Tekumid 6 BS TEKUMA Kunststoff GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekumid 6 BS |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | 无断裂 | |
| Impact strength of cantilever beam gap | 23°C | kJ/m² | <10 25 |
| Charpy Notched Impact Strength | -30°C | kJ/m² | <10 <10 |
| Impact strength of simply supported beam without notch | 23°C | 无断裂 | |
| Charpy Notched Impact Strength | 23°C | kJ/m² | <10 25 |
| Impact strength of simply supported beam without notch | -30°C | 无断裂 |
| Mechanical properties | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekumid 6 BS |
|---|---|---|---|
| Tensile creep modulus | 1hr | MPa | 800 -- |
| Flexural modulus | MPa | 2900 850 | |
| tensile strength | 断裂 | MPa | 80.0 40.0 |
| Tensile modulus | MPa | 3200 1000 |
| physical property | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekumid 6 BS |
|---|---|---|---|
| Melt volume flow rate | cm³/10min | 110 -- |
| Thermal performance | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekumid 6 BS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 55.0 60.0 |
Contact Us
Get App
Top