Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS AG15E3 FORMOSA NINGBO
TAIRILAC®
Electrical appliances、Electronic field、Electrical field
High gloss、High rigidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | FORMOSA NINGBO/AG15E3 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,6.35mm | ASTM D256 | 150 J/m |
| 23°C,6.35mm | ISO 180 | 150 J/m |
| hardness | Test Condition | Test Method | FORMOSA NINGBO/AG15E3 |
|---|---|---|---|
| Rockwell hardness | R计秤,23°C | ASTM D785 | 111 |
| R计秤,23°C | ISO 2039-2 | 111 |
| Mechanical properties | Test Condition | Test Method | FORMOSA NINGBO/AG15E3 |
|---|---|---|---|
| bending strength | 23°C | ISO 178 | 78.0 Mpa |
| tensile strength | 屈服,23°C | ISO 527-2 | 48.0 Mpa |
| Flexural modulus | 23°C | ISO 178 | 2750 Mpa |
| bending strength | 23°C | ASTM D790 | 78.0 Mpa |
| Flexural modulus | 23°C | ASTM D790 | 2750 Mpa |
| tensile strength | 23°C | ASTM D638 | 48.0 Mpa |
| flammability | Test Condition | Test Method | FORMOSA NINGBO/AG15E3 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | FORMOSA NINGBO/AG15E3 |
|---|---|---|---|
| Shrinkage rate | MD | 内部方法 | 0.40-0.70 % |
| density | 23°C | ISO 1183 | 1.05 g/cm³ |
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 2.1 g/10min |
| 200°C/5.0kg | ISO 1133 | 2.1 g/10min | |
| density | ASTM D792 | 1.05 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 21 g/10min |
| 220°C/10.0kg | ISO 1133 | 21 g/10min |
| Thermal performance | Test Condition | Test Method | FORMOSA NINGBO/AG15E3 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,Unannealed,12.7mm，HDT | ISO 75-2/A | 86.0 °C |
| vicat | ASTM D15253 | 103 °C | |
| Heat distortion temperature | 1.8MPa,未退火,12.7mm，HDT | ASTM D648 | 86.0 °C |
| 1.8MPa,退火，HDT | ISO 75-2/A | 96.0 °C | |
| vicat | ISO 306/A | 103 °C | |
| Heat distortion temperature | 1.8MPa,Annealed，HDT | ASTM D648 | 96.0 °C |
Contact Us
Get App
Top