plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC T90MF20 COVESTRO SHANGHAI
Makrolon® 
Electronic and electrical accessories
Low temperature resistanc,Filler: Mineral filler,20% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodCOVESTRO SHANGHAI/T90MF20
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B127 °C
1.8MPa,UnannealedISO 75-2/A111 °C
Linear coefficient of thermal expansionMD:23to55°CISO 11359-24E-05 cm/cm/°C
TD:23to55°CISO 11359-25.6E-05 cm/cm/°C
Vicat softening temperature--ISO 306/B120130 °C
--ISO 306/B50128 °C
mechanical propertiesTest ConditionTest MethodCOVESTRO SHANGHAI/T90MF20
Tensile modulus23°CISO 527-2/14900 Mpa
Tensile strainYield,23°CISO 527-2/503.2 %
Break,23°CISO 527-2/509.0 %
tensile strengthBreak,23°CISO 527-2/5050.0 Mpa
Yield,23°CISO 527-2/5060.0 Mpa
Electrical performanceTest ConditionTest MethodCOVESTRO SHANGHAI/T90MF20
Compared to the anti leakage trace indexSolutionAIEC 60112 V
Dielectric strength23°C,1.00mmIEC 60243-135 KV/mm
Dissipation factor23°C,100HzIEC 602501.5E-03
23°C,1MHzIEC 602503.2E-03
Relative permittivity23°C,1MHzIEC 602503.20
23°C,100HzIEC 602503.30
Surface resistivityIEC 600931E+16 ohms
Volume resistivity23°CIEC 600931E+16 ohms·cm
Physical propertiesTest ConditionTest MethodCOVESTRO SHANGHAI/T90MF20
MeltViscosity260°CISO 11443-A240 Pa·s
Melt Volume Flow Rate (MVR)260°C/5.0kgISO 113312.0 cm3/10min
Shrinkage rateMD:260°C,3.00mmISO 25770.30-0.50 %
TD:260°C,3.00mmISO 25770.25-0.45 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.20 %
Saturation,23°CISO 620.50 %
impact performanceTest ConditionTest MethodCOVESTRO SHANGHAI/T90MF20
Suspended wall beam without notch impact strength-30°CISO 18050 kJ/m²
23°CISO 180100 kJ/m²
flammabilityTest ConditionTest MethodCOVESTRO SHANGHAI/T90MF20
UL flame retardant rating0.9mmUL 94HB