PA66 R533H BK PA66 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PA66 ASCEND USA R533H BK

Injection grade

US$ 3,480 / MT

FOB Dongguan Port

thermal performance	Test Condition	Test Method	ASCEND USA/R533H BK
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	260 °C
RTI Elec	3.0 mm	UL 746	140 °C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	250 °C
RTI Imp	3.0 mm	UL 746	125 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	1.1E-4 cm/cm/°C
RTI	3.0 mm	UL 746	140 °C
Linear coefficient of thermal expansion	Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	2.1E-5 cm/cm/°C
RTI Elec	0.75 mm	UL 746	140 °C
RTI Imp	1.5 mm	UL 746	125 °C
RTI	1.5 mm	UL 746	140 °C
RTI Elec	1.5 mm	UL 746	140 °C
Melting temperature		ISO 11357-3	260 °C
RTI Imp	0.75 mm	UL 746	125 °C
RTI	0.75 mm	UL 746	140 °C
Electrical performance	Test Condition	Test Method	ASCEND USA/R533H BK
Hot wire ignition	1.5 mm	UL 746	PLC 3
High arc combustion index	0.75 mm	UL 746	PLC 0
Hot wire ignition	3.0 mm	UL 746	PLC 4
Dielectric strength	1.00 mm	IEC 60243	20 KV/mm
High voltage arc tracing rate		UL 746	PLC 1
High arc combustion index	1.5 mm	UL 746	PLC 0
Arc resistance	3.00 mm	ASTM D495	PLC 6
Volume resistivity	0.750 mm	IEC 60093	1.0E+13 ohms·cm
Hot wire ignition	0.75 mm	UL 746	PLC 4
High arc combustion index	3.0 mm	UL 746	PLC 0
Physical properties	Test Condition	Test Method	ASCEND USA/R533H BK
Shrinkage rate	横向Flow : 23°C, 2.00 mm	ISO 294-4	0.90 %
Outdoor applicability	Black	UL 746C	f1
Shrinkage rate	Flow : 23°C, 2.00 mm	ISO 294-4	0.40 %
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.7 %
Water absorption rate		24 hr, 23°C	ISO 62	0.80 %
injection	Test Condition	Test Method	ASCEND USA/R533H BK
Temperature at the front of the material cylinder			280 to 310 °C
Mold temperature			65 to 95 °C
Processing (melt) temperature			285 to 305 °C
Suggested maximum material return ratio			25 %
Spray nozzle temperature			280 to 310 °C
drying temperature			80 °C
Temperature in the middle of the barrel			280 to 310 °C
drying time			4.0 hr
Temperature at the rear of the barrel			280 to 310 °C
flammability	Test Condition	Test Method	ASCEND USA/R533H BK
Burning wire flammability index	0.75 mm	IEC 60695-2-12	725 °C
Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	750 °C
		0.75 mm	IEC 60695-2-13	750 °C
		1.5 mm	IEC 60695-2-13	725 °C
UL flame retardant rating	3.0 mm	UL 94	HB
Burning wire flammability index	3.0 mm	IEC 60695-2-12	875 °C
UL flame retardant rating	0.75 mm	UL 94	HB
UL flame retardant rating		1.5 mm	UL 94	HB
Burning wire flammability index	1.5 mm	IEC 60695-2-12	700 °C
mechanical properties	Test Condition	Test Method	ASCEND USA/R533H BK
bending strength	23°C	ISO 178	290 Mpa
tensile strength	Break, 23°C	ISO 527-2	205 Mpa
Tensile modulus	23°C	ISO 527-2	10600 Mpa
Poisson's ratio		ISO 527-2	0.40
Bending modulus	23°C	ISO 178	10200 Mpa
Tensile strain	Break, 23°C	ISO 527-2	3.0 %
impact performance	Test Condition	Test Method	ASCEND USA/R533H BK
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	70 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	80 kJ/m²

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index