Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS Deltron 1150 Shanghai Lin Gen Rubber Materials Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 16.0 kJ/m² |
| hardness | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| Rockwell hardness | R级 | 120 |
| Electrical performance | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| Surface Resistivity | 2.2E+15 ohms | ||
| dielectric constant | 1MHz | 3.00 | |
| dielectric strength | 18 kV/mm | ||
| Volume resistivity | 8E+16 ohms·cm |
| Mechanical properties | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| tensile strength | 185 MPa | ||
| bending strength | 300 MPa | ||
| Flexural modulus | 16000 MPa | ||
| compressive strength | 154 MPa | ||
| elongation | 断裂 | 2.8 % |
| flammability | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| UL flame retardant rating | 2.0mm | V-0 |
| physical property | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| density | 1.70 g/cm³ | ||
| Shrinkage rate | MD | 0.20to0.70 % | |
| Water absorption rate | 平衡 | 0.020 % |
| Thermal performance | Test Condition | Test Method | Shanghai Lin Gen Rubber Materials Co., Ltd./Deltron 1150 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | 1.3E-05 cm/cm/°C | |
| melting temperature | 288 °C | ||
| Heat distortion temperature | 1.8MPa,未退火，HDT | 268 °C |
Contact Us
Get App
Top