Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC H-3000R MITSUBISHI THAILAND
IUPILON™
parts、Fitness equipment
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | MITSUBISHI THAILAND/H-3000R |
|---|---|---|---|
| Surface Resistivity | ASTM D257/IEC 60093 | 6E+15 Ω | |
| dielectric constant | ASTM D150/IEC 60250 | 3.1 | |
| Dielectric loss | ASTM D150/IEC 60250 | 0.0090 | |
| Volume resistivity | ASTM D257/IEC 60093 | 3E+14 Ω.cm |
| Mechanical properties | Test Condition | Test Method | MITSUBISHI THAILAND/H-3000R |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | NB kg·cm/cm(J/M)ft·lb/in | |
| elongation at break | ASTM D638/ISO 527 | 118 % |
| other | Test Condition | Test Method | MITSUBISHI THAILAND/H-3000R |
|---|---|---|---|
| characteristic | 离型改良 | ||
| notes | H-3000V(R) | ||
| Color | N BK |
| Physical properties | Test Condition | Test Method | MITSUBISHI THAILAND/H-3000R |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.50-0.7 % | |
| density | ASTM D792/ISO 1183 | 1.20 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 28 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.24 % |
| processability | Test Condition | Test Method | MITSUBISHI THAILAND/H-3000R |
|---|---|---|---|
| process temperature | 270-290 °C | ||
| pressure | 50-150 Mpa | ||
| Dry conditions | 热风干燥 120℃---約4-8小时 | ||
| screw speed | 50-100 rpm | ||
| Temperature | 70-100 °C |
| Thermal performance | Test Condition | Test Method | MITSUBISHI THAILAND/H-3000R |
|---|---|---|---|
| Combustibility (rate) | UL 94 | v2 |
Contact Us
Get App
Top