Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 MB3GM24HS BK MARPLEX AUSTRALIA
--
Metal replacement、Application in the automo
Glass fiber reinforced 10、Mineral filler 20%
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | MARPLEX AUSTRALIA/MB3GM24HS BK |
|---|---|---|---|
| UL flame retardant rating | 1.60mm | UL 94 | HB |
| Basic performance | Test Condition | Test Method | MARPLEX AUSTRALIA/MB3GM24HS BK |
|---|---|---|---|
| Water absorption rate | 24hr，23℃ | ISO 62 | 7.2 % |
| density | ASTM D-792 | 1.37 g/cm³ | |
| Shrinkage rate | MD | ASTM D-955 | 0.3-0.6 % |
| Water absorption rate | 23℃,50%R | ISO 62 | 2.2 % |
| Mechanical properties | Test Condition | Test Method | MARPLEX AUSTRALIA/MB3GM24HS BK |
|---|---|---|---|
| Tensile modulus | 3.20mm | ASTM D-638 | 6250 Mpa |
| Charpy Notched Impact Strength | ISO 179 | 6 kJ/m² | |
| Flexural modulus | 3.20mm | ASTM D-790 | 5750 Mpa |
| tensile strength | 3.20mm | ASTM D-638 | 110 Mpa |
| bending strength | 3.20mm | ASTM D-790 | 172 Mpa |
| Impact strength of cantilever beam gap | 3.2mm | ASTM D-256 | 60 J/m |
| elongation | 断裂,3.20mm | ASTM D-638 | 4.0 % |
| Thermal performance | Test Condition | Test Method | MARPLEX AUSTRALIA/MB3GM24HS BK |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动 | ASTM D-696 | 0.000042 cm/cm/℃ |
| Heat distortion temperature | 0.45MPa,未退火,3.2mm，HDT | ASTM D-648 | 220 °C |
| 1.8MPa,未退火,3.2mm，HDT | ASTM D-648 | 280 °C |
Contact Us
Get App
Top