Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 2103T Pingdingshan Shenma
--
Used for railway fender seats, pipe fittings, and sports equipment
High modulus toughening type, high temperature resistance, high impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | Pingdingshan Shenma/2103T |
|---|---|---|---|
| density | ISO 1183 | 1.12 | |
| Shrinkage rate | 平行,- | - | 1.10 % |
| 垂直,- | - | 1.20 % | |
| UL flame retardant rating | UL 94 | -- | |
| Water absorption rate | 23℃Saturation | ISO 62 | -- % |
| thermal performance | Test Condition | Test Method | Pingdingshan Shenma/2103T |
|---|---|---|---|
| Hot deformation temperature | 1.80MPa | ISO 75 | 66.4 ℃ |
| Linear coefficient of thermal expansion | ISO 11359 | 80 10 | |
| Melting temperature | Dry | ISO 3146 | 246-255 ℃ |
| melt mass-flow rate | Dry | ISO 1133 | 15.8 g/10min |
| mechanical properties | Test Condition | Test Method | Pingdingshan Shenma/2103T |
|---|---|---|---|
| Bending modulus | Dry | ISO 178 | 1.4 GPa |
| bending strength | Dry | ISO 178 | 64.6 MPa |
| Charpy Notched Impact Strength | Dry | ISO 179 | 72.8 KJ/m |
| Elongation at Break | Dry | ISO 527 | 26.2 % |
| Impact strength of cantilever beam gap | Dry | ISO 180 | 63.9 KJ/m |
| Tensile modulus | Dry | ISO 527 | 2.1 GPa |
| tensile strength | Dry | ISO 527 | 60.3 MPa |
| Electrical performance | Test Condition | Test Method | Pingdingshan Shenma/2103T |
|---|---|---|---|
| Dielectric strength | Dry | IEC 243 | -- Kv/mm |
| Volume resistivity | Dry/湿态 | IEC 93 | -- Ω.cm |