Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA410 Q-KV DSM
EcoPaXX®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM/Q-KV |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 80 kJ/m² |
| -30°C | ISO 179/1eU | 90 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DSM/Q-KV |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3500 Mpa | |
| bending strength | ISO 178 | 120 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 5.5 % |
| Flexural modulus | ISO 178 | 3700 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 4.0 % |
| tensile strength | 断裂 | ISO 527-2 | 75.0 Mpa |
| Electrical performance | Test Condition | Test Method | DSM/Q-KV |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 32 KV/mm | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | -- ohms | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| flammability | Test Condition | Test Method | DSM/Q-KV |
|---|---|---|---|
| Flammability level | UL 94 | V-2 | |
| Burning wire flammability index | 0.75 mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 0.75 mm | IEC 60695-2-13 | 960 °C |
| physical property | Test Condition | Test Method | DSM/Q-KV |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.8 % |
| 24 hr, 23°C | ISO 62 | 0.70 % | |
| Biobased content | ASTM D6866B | 62 % | |
| Shrinkage rate | 流量 | ISO 294-4 | 1.0 % |
| 横向流量 | ISO 294-4 | 0.80 % |
| Thermal performance | Test Condition | Test Method | DSM/Q-KV |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 250 °C | |
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 190 °C |
| 1.8 MPa, 未退火，HDT | ISO 75-2/A | 110 °C |
Contact Us
Get App
Top