Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HIPS HT88 USA Monsanto
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | USA Monsanto/HT88 |
|---|---|---|---|
| Water absorption rate | JIS K-7209 | 0.07-0.08 % | |
| melt mass-flow rate | 200°C 负荷 5kg | JIS K-7210 | 7.0 g/10min |
| Mechanical properties | Test Condition | Test Method | USA Monsanto/HT88 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.2mm×12.7mm | JIS K-7110 | 9.0 kg-cm/cm of notch |
| tensile strength | JIS K-7113 | 270 kg/cm | |
| elongation at break | JIS K-7113 | 40 % | |
| bending strength | JIS K-7203 | 430 kg/cm | |
| Rockwell hardness | JIS K-7202 | R109 R,MScale | |
| Rubbing modulus | JIS K-7203 | 2.4 10 |
| Electrical performance | Test Condition | Test Method | USA Monsanto/HT88 |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | >10 Ω.cm |
| processability | Test Condition | Test Method | USA Monsanto/HT88 |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 3-6 10 |
| physical property | Test Condition | Test Method | USA Monsanto/HT88 |
|---|---|---|---|
| density | JIS K-7112 | 1.04-1.06 |
| Thermal performance | Test Condition | Test Method | USA Monsanto/HT88 |
|---|---|---|---|
| flammability | UL 94 | HB | |
| vicat | JIS K-7206 | 90 °C | |
| Heat distortion temperature | 6.4mm×12.7mm纤维强度18.56kg/cm | JIS K-7207 | 80 °C |
| Linear coefficient of thermal expansion | ASTM D-696 | 7-8 10 |
Contact Us
Get App
Top