Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM FC2020H KEP KOREA
KEPITAL®
--
Carbon fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | KEP KOREA/FC2020H |
---|---|---|---|
Shrinkage rate | 3mmt,直径100mm | 0.4 % | |
Water absorption rate | 23°C,60%RH | ASTM D-570 | 0.28 % |
thermal performance | Test Condition | Test Method | KEP KOREA/FC2020H |
---|---|---|---|
Combustibility | 0.8mmt | UL -94 | HB |
Hot deformation temperature | 4.6kgf/cm | ASTM D-648 | 164 °C |
18.6kgf/cm | ASTM D-648 | 163 °C | |
Linear coefficient of thermal expansion | 20°C -80°C | ASTM D-696 | 1.5 |
Melting temperature | 10°C/min | DSC Method | 165 °C |
melt mass-flow rate | ASTM D-1238 | 6 g/10 min |
mechanical properties | Test Condition | Test Method | KEP KOREA/FC2020H |
---|---|---|---|
Bending modulus | 23°C | ASTM D-790 | 13.5 |
bending strength | 23°C | ASTM D-790 | 2.500 Kgf/cm |
elongation | 23°C | ASTM D-638 | 3 % |
Elongation at Break | 2mmt | ASTM D-732 | 820 Kgf/cm |
Impact strength of cantilever beam gap | 3.2mmt Stype | ASTM D-1822 | 160 Kgf.cm/cm |
Notch 3.2mmt | ASTM D-256 | 8.0 Kgf.cm/cm | |
Rockwell hardness | M scale | ASTM D-785 | M98 |
tensile strength | 23°C | ASTM D-638 | 1.700 Kgf/cm |
Electrical performance | Test Condition | Test Method | KEP KOREA/FC2020H |
---|---|---|---|
Surface resistivity | ASTM D-257 | 5×10 Ω | |
Volume resistivity | ASTM D-257 | 2×10 Ω.cm |
Physical properties | Test Condition | Test Method | KEP KOREA/FC2020H |
---|---|---|---|
filler content | 20 % |