Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

COC 5013X16 JAPAN POLYPLASTIC
TOPAS®
LCD application,Optical applications
Dimensional stability,Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| Glass transition temperature | ISO 11357-2 | 134 °C | |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 127 °C |
| Vicat softening temperature | ISO 306/B50 | 135 °C |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1A/1 | 3200 Mpa | |
| Tensile strain | Yield | ISO 527-2/1A/50 | 1.7 % |
| tensile strength | Yield | ISO 527-2/1A/50 | 46.0 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
| Relative permittivity | 10kHz | IEC 60250 | 2.35 |
| 1kHz | IEC 60250 | 2.35 | |
| Volume resistivity | IEC 60093 | >1.0E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| melt mass-flow rate | 260°C/2.16kg | ISO 1133 | 44 g/10min |
| Melt Volume Flow Rate (MVR) | 260°C/2.16kg | ISO 1133 | 48.0 cm3/10min |
| Shrinkage rate | Internal Method | 0.10-0.50 % | |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.010 % |
| impact performance | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 13 kJ/m² |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| optical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/5013X16 |
|---|---|---|---|
| Refractive index | ISO 489 | 1.530 | |
| transmissivity | ISO 13468-2 | 91.0 % |