Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS TAROBLEND 66 Taro Plast S.p.A.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTaro Plast S.p.A./TAROBLEND 66
Impact strength of cantilever beam gap23°CASTM D256450 J/m
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Electrical performanceTest ConditionTest MethodTaro Plast S.p.A./TAROBLEND 66
Volume resistivityIEC 60093>1.0E+15 ohms·cm
dielectric constantIEC 602502.90
dielectric strength2.00mmIEC 60243-124 kV/mm
Compared to the Leakage Tracking Index (CTI)解决方案AIEC 60112PLC 2
Mechanical propertiesTest ConditionTest MethodTaro Plast S.p.A./TAROBLEND 66
Flexural modulusISO 1782250 MPa
Tensile strain断裂ISO 527-2/5050 %
Tensile modulusISO 527-2/12100 MPa
bending strengthISO 17880.0 MPa
tensile strength 屈服ISO 527-2/5050.0 MPa
flammabilityTest ConditionTest MethodTaro Plast S.p.A./TAROBLEND 66
Burning wire flammability index2.0mmIEC 60695-2-12750 °C
UL flame retardant rating1.6mmUL 94HB
Limiting Oxygen IndexASTM D286323 %
physical property Test ConditionTest MethodTaro Plast S.p.A./TAROBLEND 66
Shrinkage rateMD内部方法0.40to0.70 %
density23°CISO 11831.13to1.15 g/cm³
Water absorption rate23°C,24hrISO 620.20 %
饱和,23°CISO 620.60 %
Shrinkage rateTD内部方法0.40to0.70 %
melt mass-flow rate260°C/5.0kgASTMD123822 g/10min
Thermal performanceTest ConditionTest MethodTaro Plast S.p.A./TAROBLEND 66
Continuous use temperatureIEC 6021690.0 °C
Linear coefficient of thermal expansionMD：-30到30°CISO 11359-26.5E-05 cm/cm/°C
vicat--ISO 306/A50130 °C
--ISO 306/B50125 °C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A116 °C
ball-indentation hardness125°CIEC 60695-10-2通过

Contact Us

Get App

Top