Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS CX7110 SABIC INNOVATIVE NANSHA
CYCOLOY™
Automotive sector,Electronic field,Electrical field
Flame retardant,High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CX7110 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 15 kJ/m² |
| -30°C | ISO 179/1eA | 10 kJ/m² | |
| Dart impact | 23°C, Total Energy | ASTM D3763 | 63.0 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CX7110 |
|---|---|---|---|
| Tensile modulus | --2 | ASTM D638 | 2900 Mpa |
| tensile strength | 屈服3 | ASTM D638 | 64.0 Mpa |
| elongation | 断裂3 | ASTM D638 | 90 % |
| 断裂 | ISO 527-2/50 | 90 % | |
| Flexural modulus | --5 | ISO 178 | 2500 Mpa |
| bending strength | 屈服, 50.0 mm 跨距4 | ASTM D790 | 100 Mpa |
| --5,6 | ISO 178 | 100 Mpa | |
| Flexural modulus | 50.0 mm 跨距4 | ASTM D790 | 2700 Mpa |
| tensile strength | 断裂 | ISO 527-2/50 | 51.0 Mpa |
| 屈服 | ISO 527-2/50 | 61.0 Mpa | |
| elongation | 屈服 | ISO 527-2/50 | 4.0 % |
| 屈服3 | ASTM D638 | 4.0 % | |
| tensile strength | 断裂3 | ASTM D638 | 54.0 Mpa |
| Tensile modulus | -- | ISO 527-2/1 | 2700 Mpa |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CX7110 |
|---|---|---|---|
| UL flame retardant rating | 1.8 mm | UL 94 | 5VB |
| 1.0 mm | UL 94 | V-1 | |
| 0.75 mm | UL 94 | V-2 | |
| 1.2 mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CX7110 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.10 % |
| Melt volume flow rate | 260°C/2.16 kg | ISO 1133 | 21.0 cm3/10min |
| melt mass-flow rate | 260°C/2.16 kg | ASTM D1238 | 22 g/10 min |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.20 % |
| Shrinkage rate | 3.20 mm，Flow | 内部方法 | 0.40 - 0.60 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CX7110 |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 7.5E-5 cm/cm/°C |
| vicat | -- | ISO 306/B120 | 103 °C |
| thermal conductivity | ISO 8302 | 0.20 W/m/K | |
| vicat | -- | ASTM D152510 | 102 °C |
| ball-indentation hardness | 73 到 77°C | IEC 60695-10-2 | 通过 |
| Linear coefficient of thermal expansion | 横向 : -40°C | ISO 11359-2 | 7.5E-5 cm/cm/°C |
| Heat distortion temperature | 0.45 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 94.0 °C |
| 1.8 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 90.0 °C | |
| 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距9，HDT | ISO 75-2/Af | 84.0 °C | |
| Linear coefficient of thermal expansion | 横向 : -40 到 40°C | ASTM E831 | 7.5E-5 cm/cm/°C |
| Heat distortion temperature | 0.45 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 98.0 °C |
| 1.8 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 84.0 °C |
| injection | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/CX7110 |
|---|---|---|---|
| screw speed | 40 to 70 rpm | ||
| Suggested maximum moisture content | 0.040 % | ||
| Processing (melt) temperature | 245 to 275 °C | ||
| drying temperature | 80 to 90 °C | ||
| Suggested injection volume | 30 to 80 % | ||
| drying time | 3.0 to 4.0 hr | ||
| Temperature in the middle of the barrel | 220 to 265 °C | ||
| Temperature at the rear of the barrel | 220 to 255 °C | ||
| Exhaust hole depth | 0.038 to 0.076 mm | ||
| Temperature at the front of the material cylinder | 245 to 275 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| Temperature | 60 to 80 °C | ||
| Spray nozzle temperature | 245 to 275 °C |
Contact Us
Get App
Top