Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 TECAST™ 6PAG ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6PAG |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 32 J/m |
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6PAG |
|---|---|---|---|
| Rockwell hardness | R级,23°C | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6PAG |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 86.2 MPa |
| Tensile modulus | ASTM D638 | 2410 MPa | |
| Flexural modulus | 23°C | ASTM D790 | 2410 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 75.8 MPa |
| elongation | 断裂,23°C | ASTM D638 | 20 % |
| Electrical performance | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6PAG |
|---|---|---|---|
| dielectric constant | 23°C,60Hz | ASTM D150 | 3.70 |
| dielectric strength | ASTM D149 | 20 kV/mm |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6PAG |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 1.2 % |
| density | ASTM D792 | 1.15to1.17 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6PAG |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 93.3 °C |
| melting temperature | ASTM D2133 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 188 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7.2E-05 cm/cm/°C |
| maximum service temperature | Intermittent | 149 °C | |
| LongTerm | UL 746B | 93 °C |
Contact Us
Get App
Top