Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PUR-Capro/MDI C600 D CHEMTURU USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| Wear factor | DIN2 | 144 | |
| DIN3 | 203 | ||
| NBS2 | 1100 % | ||
| NBS3 | 1600 % |
| hardness | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 60 |
| film | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| Tear resistance of pants | --3 | ASTM D1938 | 42.0 N/mm |
| --2 | ASTM D1938 | 40.3 N/mm |
| Mechanical properties | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| Wear factor | --2，相对体积损失 | 100 mm³ | |
| --3，相对体积损失 | 71.0 mm³ |
| thermosetting | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| stripping time | 140°C | 10 min | |
| Post curing time | 120°C5 | 16to24 hr | |
| stripping time | 120°C | 20 min | |
| STORAGE STABILITY | 70°C | 1400 min | |
| Post curing time | 140°C6 | 16to24 hr |
| elastomer | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| Falling ball impact strength | --2 | 47 % | |
| Shore hardness | --2 | ASTM D2632 | 45 % |
| --3 | ASTM D2632 | 45 % | |
| Falling ball impact strength | --3 | 47 % | |
| compression set | 70°C,22hr3 | ASTM D395A | 3.0 % |
| tear strength | --4,3 | ASTM D624 | 99.8 kN/m |
| compression set | 70°C,22hr2 | ASTM D395A | 5.0 % |
| tensile strength | 300%应变2 | ASTM D412 | 30.6 MPa |
| tear strength | --4,2 | ASTM D624 | 98.1 kN/m |
| tensile strength | --2 | ASTM D412 | 37.7 MPa |
| --3 | ASTM D412 | 37.9 MPa | |
| tear strength | 开裂2 | ASTM D470 | 22 kN/m |
| 开裂3 | ASTM D470 | 25 kN/m | |
| tensile strength | 100%应变2 | ASTM D412 | 17.6 MPa |
| 100%应变3 | ASTM D412 | 17.9 MPa | |
| 300%应变3 | ASTM D412 | 31.4 MPa | |
| compression set | 100°C,22hr2 | ASTM D395A | 8.0 % |
| 100°C,22hr3 | ASTM D395A | 5.0 % | |
| elongation | 断裂3 | ASTM D412 | 330 % |
| 断裂2 | ASTM D412 | 300 % |
| physical property | Test Condition | Test Method | CHEMTURU USA/ C600 D |
|---|---|---|---|
| density | ASTM D792 | 1.18 g/cm³ |
Contact Us
Get App
Top