Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK AV-848 CF30 USA Suwei
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | USA Suwei/AV-848 CF30 |
|---|---|---|---|
| tensile strength | ASTM D638 | 176 MPa | |
| Suspended wall beam without notch impact strength | ASTM D256 | 534 J/m | |
| Flexural modulus | ASTM D790 | 16500 MPa | |
| Tensile modulus | ASTM D638 | 18800 MPa | |
| bending strength | ASTM D790 | 259 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 42.7 J/m | |
| elongation at break | ASTM D638 | 1.5 % |
| physical property | Test Condition | Test Method | USA Suwei/AV-848 CF30 |
|---|---|---|---|
| density | ASTM D792 | 1.42 g/cm | |
| melt mass-flow rate | 2.16kg@400℃ | ASTM D1238 | 2.5 g/10 min |
| Shrinkage rate | across flow | ASTM D955 | 0.50 % |
| Water absorption rate | ASTM D570 | 0.10 % | |
| Shrinkage rate | Flow | ASTM D955 | 0.10 % |
| Thermal performance | Test Condition | Test Method | USA Suwei/AV-848 CF30 |
|---|---|---|---|
| Heat distortion temperature | 1.82MPa，退火，HDT | ASTM D648 | 257 ℃ |
Contact Us
Get App
Top