Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 TAROMID B 280 X0 Taro Plast S.p.A.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Taro Plast S.p.A./TAROMID B 280 X0 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 2.8 kJ/m² |
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTMD256 | 35 J/m |
| Mechanical properties | Test Condition | Test Method | Taro Plast S.p.A./TAROMID B 280 X0 |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 3000 MPa | |
| elongation | 断裂 | ASTMD638 | 6.0 % |
| bending strength | 断裂 | ASTM D790 | 100 MPa |
| Tensile modulus | ASTMD638 | 3200 MPa | |
| tensile strength | 断裂 | ASTMD638 | 66.0 MPa |
| bending strength | -- | ISO 178 | 100 MPa |
| Electrical performance | Test Condition | Test Method | Taro Plast S.p.A./TAROMID B 280 X0 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 1 |
| flammability | Test Condition | Test Method | Taro Plast S.p.A./TAROMID B 280 X0 |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 775 °C | |
| UL flame retardant rating | 1.0mm | UL 94 | V-0 |
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| Limiting Oxygen Index | ASTM D2863 | 29 % |
| physical property | Test Condition | Test Method | Taro Plast S.p.A./TAROMID B 280 X0 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.0to1.5 % |
| Water absorption rate | 饱和 | ASTM D570 | 9.0 % |
| GranuleHumidity | 内部方法 | <0.10 % | |
| density | ASTMD792 | 1.21to1.23 g/cm³ | |
| Water absorption rate | 23°C,24hr | ASTMD570 | 1.4to1.8 % |
| 饱和,23°C | ISO 62 | 9.0 % | |
| Shrinkage rate | TD | ASTM D955 | 1.0to1.5 % |
| Thermal performance | Test Condition | Test Method | Taro Plast S.p.A./TAROMID B 280 X0 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTMD648 | 72.0 °C |
| vicat | -- | ASTMD15259 | 195 °C |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 1E-04 cm/cm/°C |
| Continuous use temperature | --5 | IEC 60216 | 100 °C |
| --4 | IEC 60216 | 70.0 °C | |
| --7 | IEC 60216 | 120 °C | |
| ball-indentation hardness | 165°C | VDE0470 | 通过 |
| melting temperature | ASTMD211 | 222 °C | |
| Continuous use temperature | --6 | IEC 60216 | 100 °C |
| vicat | -- | ASTMD15258 | 200 °C |
Contact Us
Get App
Top