Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Polyarylate U-polymer LM-8503-10 UNITIKA JAPAN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer LM-8503-10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 47 J/m |
| hardness | Test Condition | Test Method | UNITIKA JAPAN/U-polymer LM-8503-10 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 123 |
| Mechanical properties | Test Condition | Test Method | UNITIKA JAPAN/U-polymer LM-8503-10 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 9.0 % |
| tensile strength | ASTM D638 | 69.0 MPa | |
| compressive strength | ASTM D695 | 86.0 MPa | |
| Flexural modulus | ASTM D790 | 3400 MPa | |
| bending strength | ASTM D790 | 109 MPa |
| physical property | Test Condition | Test Method | UNITIKA JAPAN/U-polymer LM-8503-10 |
|---|---|---|---|
| Shrinkage rate | MD：3.00mm | ASTM D955 | 0.37 % |
| Water absorption rate | 24hr,3.18mm | ASTM D570 | 0.13 % |
| density | ASTM D792 | 1.38 g/cm³ |
| Thermal performance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer LM-8503-10 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 110 °C |
Contact Us
Get App
Top