Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 66G25V0P DOMO CHEM GERMANY
--
--
Filler: Glass fiber reinf,25% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
Charpy Notched Impact Strength23°CISO 179/1eA5.5 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U30 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU35 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A5.5 kJ/m²
Mechanical propertiesTest ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
Tensile modulusISO 527-2/18000 Mpa
tensile strength 断裂ISO 527-2/5110 Mpa
bending strengthISO 178170 Mpa
Flexural modulusISO 1787000 Mpa
Tensile strain断裂ISO 527-2/52.5 %
Electrical performanceTest ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
Compared to the Leakage Tracking Index (CTI)解决方案 AIEC 60112 V
Volume resistivityIEC 600931.0E+15 ohms·cm
Surface ResistivityIEC 600931.0E+13 ohms
flammabilityTest ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
burning rateFMVSS 302< 100 mm/min
UL flame retardant rating0.8 mmUL 94V-0
Hot filament ignition temperature1.0 到 3.0 mmIEC 60695-2-13775 °C
Burning wire flammability index1.0 到 3.0 mmIEC 60695-2-12960 °C
physical property Test ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
densityISO 11831.39 g/cm³
Thermal performanceTest ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
melting temperatureISO 11357-3262 °C
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/B240 °C
vicatISO 306/B50235 °C
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/A220 °C
injectionTest ConditionTest MethodDOMO CHEM GERMANY/66G25V0P
drying time2.0 to 4.0 hr
Processing (melt) temperature270 to 290 °C
drying temperature75 to 85 °C
Temperature80 to 100 °C

Contact Us

Get App

Top