Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 HiFill FR® PA6 FR NAT Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
Impact strength of cantilever beam gap23°C,3.18mmASTM D256130 J/m
hardnessTest ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
Rockwell hardnessR级ASTM D785112
Mechanical propertiesTest ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
elongation屈服ASTM D63860 %
Flexural modulusASTM D7901310 MPa
tensile strength 屈服ASTM D63851.7 MPa
Electrical performanceTest ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
Volume resistivityASTM D2571E+14 ohms·cm
dielectric strengthASTM D14921 kV/mm
Surface ResistivityASTM D2571E+12 ohms
flammabilityTest ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
UL flame retardant rating1.5mmUL 94V-0
physical property Test ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
Water absorption rate24hrASTM D5700.70 %
densityASTM D7921.19 g/cm³
Shrinkage rateMD:3.18mmASTM D9551.0 %
Thermal performanceTest ConditionTest MethodTechmer Polymer Modifiers/HiFill FR® PA6 FR NAT
Heat distortion temperature1.8MPa,未退火,HDTASTM D64860.0 °C
Linear coefficient of thermal expansionMDASTM D6965.9E-05 cm/cm/°C

Contact Us

Get App

Top