Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Plastomer, Ethylene-based Premi-Glas® 2550®B-CR-SX USA Premix
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Premix/Premi-Glas® 2550®B-CR-SX |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 模压成型 | ASTM D256 | 990 J/m |
| Impact strength of cantilever beam gap | 模压成型 | ASTM D256 | 690 J/m |
| Mechanical properties | Test Condition | Test Method | USA Premix/Premi-Glas® 2550®B-CR-SX |
|---|---|---|---|
| Flexural modulus | 模压成型 | ASTM D790 | 9510 MPa |
| Tensile modulus | 模压成型 | ASTM D638 | 13100 MPa |
| bending strength | 模压成型 | ASTM D790 | 165 MPa |
| tensile strength | 模压成型 | ASTM D638 | 68.9 MPa |
| Poisson's ratio | 0.21 |
| flammability | Test Condition | Test Method | USA Premix/Premi-Glas® 2550®B-CR-SX |
|---|---|---|---|
| fire propagation index | UL 723 | 5.00 | |
| Smoke production | UL 723 | 20.0to50.0 | |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | USA Premix/Premi-Glas® 2550®B-CR-SX |
|---|---|---|---|
| density | 2.00 g/cm³ | ||
| Shrinkage rate | MD | 0.025to0.15 % | |
| Outdoor applicability | UL 746C | f1 |
| Thermal performance | Test Condition | Test Method | USA Premix/Premi-Glas® 2550®B-CR-SX |
|---|---|---|---|
| thermal conductivity | 1.3 W/m/K | ||
| Linear coefficient of thermal expansion | MD2 | 2.3E-05 cm/cm/°C | |
| RTI Imp | UL 746 | 130 °C | |
| RTI Str | UL 746 | 130 °C | |
| RTI Elec | UL 746 | 105 °C | |
| Linear coefficient of thermal expansion | TD3 | 3.5E-05 cm/cm/°C |
Contact Us
Get App
Top