Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Wondel® S SG4 Nanjing Julong Engineering Plastics Co., LTD
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 6.0 kJ/m² |
| hardness | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| Rockwell hardness | R计秤 | ISO 2039-2 | 118 |
| Mechanical properties | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| tensile strength | 屈服 | ISO 527-2 | 75.0 MPa |
| bending strength | ISO 178 | 110 MPa |
| Electrical performance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+14 ohms |
| flammability | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.20to0.40 % | |
| density | ISO 1183 | 1.21 g/cm³ |
| Thermal performance | Test Condition | Test Method | Nanjing Julong Engineering Plastics Co., LTD/Wondel® S SG4 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 105 °C |
Contact Us
Get App
Top