Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PET UT408 COVESTRO GERMANY
Makroblend®
Electronic field、Electrical field
High mobility、Dimensional stability、High temperature resistan
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | COVESTRO GERMANY/UT408 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 7391 | 60 kJ/m² |
| -30°C | ISO 7391 | 10 kJ/m² |
| Mechanical properties | Test Condition | Test Method | COVESTRO GERMANY/UT408 |
|---|---|---|---|
| bending strength | 3.5%Strain,23°C | ISO 178 | 71.0 Mpa |
| tensile strength | 屈服,23°C | ISO 527-2/50 | 59.0 Mpa |
| 断裂,23°C | ISO 527-2/50 | 64.0 Mpa | |
| bending strength | 23°C | ISO 178 | 88.0 Mpa |
| Tensile strain | 屈服,23°C | ISO 527-2/50 | 5.5 % |
| Flexural modulus | 23°C | ISO 178 | 2350 Mpa |
| Tensile modulus | 23°C | ISO 527-2/1 | 2400 Mpa |
| Nominal tensile fracture strain | 23°C | ISO 527-2/50 | 100 % |
| Electrical performance | Test Condition | Test Method | COVESTRO GERMANY/UT408 |
|---|---|---|---|
| dielectric strength | 23°C,1.00mm | IEC 60243-1 | 34 KV/mm |
| relative permittivity | 23°C,1MHz | IEC 60250 | 3.10 |
| Volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
| relative permittivity | 23°C,100Hz | IEC 60250 | 3.20 |
| Surface Resistivity | IEC 60093 | 1E+16 ohms | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 2 |
| Dissipation Factor | 23°C,100Hz | IEC 60250 | 1.3E-03 |
| 23°C,1MHz | IEC 60250 | 0.014 |
| flammability | Test Condition | Test Method | COVESTRO GERMANY/UT408 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | COVESTRO GERMANY/UT408 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 2577 | 0.60-0.80 % |
| density | 23°C | ISO 1183 | 1.22 g/cm³ |
| Melt volume flow rate | 270°C/5.0kg | ISO 1133 | 20.0 cm3/10min |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
| Shrinkage rate | MD | ISO 2577 | 0.60-0.80 % |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.50 % |
| Thermal performance | Test Condition | Test Method | COVESTRO GERMANY/UT408 |
|---|---|---|---|
| vicat | ISO 306/B120 | 142 °C | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 7E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 131 °C |
| thermal conductivity | 23°C | ISO 8302 | 0.20 W/m/K |
| Linear coefficient of thermal expansion | TD：23to55°C | ISO 11359-2 | 8E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 109 °C |
Contact Us
Get App
Top