Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP G3230A-10000 SABIC INNOVATIVE US
SABIC®
Engine hood parts
Homopolymer、Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/G3230A-10000 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 81 J/m |
| -30°C | ISO 180/1A | 11 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C,3.20mm | ASTM D4812 | 570 J/m |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 10 kJ/m² |
| GardnerImpact | 23°C | ASTM D5420 | 0.520 J |
| InstrumentedDartImpact | 23°C,EnergyatPeakLoad | ASTM D3763 | 7.65 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/G3230A-10000 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 6500 Mpa | |
| ASTM D638 | 6590 Mpa | ||
| elongation | 断裂 | ASTM D638 | 2.7 % |
| tensile strength | 断裂 | ASTM D638 | 83.0 Mpa |
| Flexural modulus | 50.0mm跨距4 | ASTM D790 | 5130 Mpa |
| 50.0mm跨距5 | ISO 178 | 6600 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 3.3 % |
| tensile strength | 断裂 | ISO 527-2/1A/50 | 85.0 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/G3230A-10000 |
|---|---|---|---|
| Shrinkage rate | MD:23°C,48小时 | 内部方法 | 0.40 % |
| TD:23°C,48小时 | 内部方法 | 0.70 % | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 12 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/G3230A-10000 |
|---|---|---|---|
| vicat | ISO 306/A50 | 164 °C | |
| Heat distortion temperature | 0.45MPa,Unannealed，HDT | ISO 75-2/B | 160 °C |
| 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 159 °C | |
| Linear coefficient of thermal expansion | MD：-30到100°C | ISO 11359-2 | 5.6E-06 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,Unannealed，HDT | ISO 75-2/A | 150 °C |
| Linear coefficient of thermal expansion | TD：-30to100°C | ISO 11359-2 | 1.6E-04 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 150 °C |
Contact Us
Get App
Top