Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPEE KP3339UM KOLON KOREA
KOPEL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | KOLON KOREA/KP3339UM |
|---|---|---|---|
| Shore hardness | 邵氏 D | ASTM D2240 | 39 |
| Mechanical properties | Test Condition | Test Method | KOLON KOREA/KP3339UM |
|---|---|---|---|
| tensile strength | 断裂, 3.20 mm | ASTM D638 | 25.0 Mpa |
| elongation | 断裂, 3.20 mm | ASTM D638 | 860 % |
| bending strength | 3.20 mm | ASTM D790 | 4.00 Mpa |
| Flexural modulus | 3.20 mm | ASTM D790 | 49.0 Mpa |
| flammability | Test Condition | Test Method | KOLON KOREA/KP3339UM |
|---|---|---|---|
| UL flame retardant rating | 0.8 mm | UL 94 | HB |
| physical property | Test Condition | Test Method | KOLON KOREA/KP3339UM |
|---|---|---|---|
| Water absorption rate | 24 hr, 23°C | ASTM D570 | 0.70 % |
| melt mass-flow rate | 230°C/2.16 kg | ASTM D1238 | 12 g/10 min |
| Shrinkage rate | Flow | ASTM D955 | 1.1 % |
| Thermal performance | Test Condition | Test Method | KOLON KOREA/KP3339UM |
|---|---|---|---|
| vicat | ASTM D15253 | 138 °C | |
| melting temperature | ASTM D3418 | 195 °C |
| injection | Test Condition | Test Method | KOLON KOREA/KP3339UM |
|---|---|---|---|
| drying time | 3.0 to 8.0 hr | ||
| Suggested maximum moisture content | < 0.10 % | ||
| Temperature in the middle of the barrel | 200 to 220 °C | ||
| Temperature at the rear of the barrel | 180 to 190 °C | ||
| drying temperature | 100 to 110 °C | ||
| Temperature at the front of the material cylinder | 210 to 220 °C | ||
| Temperature | 20 to 40 °C | ||
| Spray nozzle temperature | 210 to 220 °C |
Contact Us
Get App
Top